INDOPOX, INDUSTRIAL GRADE FLOOR EPOXY APPLICATION METHOD

PREPARATION:

Concrete needs at least 28 Days to be fully cured.

Etch the floor or Grind it.

To acid wash, Dilute one third Hydrochloridric acid with water,

Add Acid to the water tank,

Pour on floor, Use broom to spread it out,

Wash it by high pressure washer after 5 Min.

Apply PRIMIT when the floor is dried, Use 12 mm nap roller.

Follow the ratio, Mix thoroughly by Mixer, Pot life two hours,
Cut edges and corners first.
EPOXY PRIMER, Needs to be applied on bare concrete as a thin layer to penetrate and needs 8 hours to dry.

Inspect the floor, Needs to be dried.

Patch Cavities and Cracks by Builderpox.

Apply First Coat by roller, Use 12 mm nap roller

Follow the ratio, Mix thoroughly by Mixer, Pot life 30 Min,
Mix Small Batch, Use Scale, Mix by Weigh not Volume.
Cut edges and corners first.
Pour on Floor, Use Squeege to spread it out, apply by 270 mm roller, Check not to leave any line behind. Needs 8 hours to walk on.

Apply Second Coat by roller, Use 12 mm nap roller

Follow the ratio, Mix thoroughly by Mixer, Pot life 30 Min,
Mix Small Batch, Use Scale, Mix by Weigh not Volume.
Cut edges and corners first.
Pour on Floor, Use Squeege to spread it out, apply by 270 mm roller, Check not to leave any line behind. Needs 24 hours to walk on.
Needs 7 days to fully cured

Do not wet the area at least for seven days depends on the weather condition.