Quick Build CP-114 Epoxy Concrete Repair Putty – 7 L

Description

A chipped joint or a pothole in a slab is a small job, but it holds up the whole floor. You can’t coat over it, and you can’t leave the floor out of action for a week waiting on a slow repair.

Quick Build is a two-part epoxy filler putty for patching damaged concrete floors before they are coated. It is made from the same epoxy resin as our solvent-free floor system, so the patch is as hard-wearing as the coating that goes over it. It stands up to foot and vehicle traffic, impact, water, and mild acids and alkalis.

Where it goes and where it doesn’t

Use it on:

• Chipped slab edges and saw-cut joint arrises
• Spalled patches, gouges and pop-outs up to 50 mm deep
• Non-moving cracks in garage, workshop, warehouse and commercial floors
• Slabs with moisture content up to 4%

Don’t use it on:

• Moving or structural cracks. If a crack is still opening, it will open straight through any rigid filler. Find and fix the cause first.
• Expansion or control joints that need to move. These take a flexible sealant.
• Slabs above 4% moisture, or with rising damp. Test the slab first.
• Below 5°C. It won’t cure properly.

How far it goes

Coverage depends entirely on the size of the damage. Deep or wide voids use more than you expect, so measure the damage first and order with a margin.

The numbers