GRANPOX SL 500 | Coloured Quartz Self-Levelling Epoxy Floor Coating – 10L

A flat floor is a preparation job before it is a coating job

Most self-levelling floors that go wrong don’t go wrong because of the resin. They go wrong because the slab was still holding moisture, the primer was skipped to save an hour, or the mix sat in the bucket past its pot life and went down in ridges that no roller was going to pull out.

GRANPOX SL 500 is built for people who have done the prep and want a floor that finishes flat, takes traffic, and looks the same in five years as it did on day two.

What is GRANPOX SL 500?

GRANPOX SL 500 is a two-part epoxy self-levelling floor coating supplied with a graded coloured quartz blend. Poured, spread and spike-rolled, it self-levels to a seamless finish with the quartz carried through the body of the coat rather than broadcast on top — so the colour and the texture don’t wear off the surface; they wear with it.

Available in 4 Colours.

Where it goes

• Warehouse and workshop floors that see foot traffic, trolleys, forklifts, and lifts
• Showrooms, retail and display floors where the finish is part of the fit-out
• Commercial kitchens, plant rooms and wash-down areas
• Over sound concrete, and over existing epoxy that has been mechanically abraded and is well bonded

Where it doesn’t

• Slabs without a working damp-proof membrane, unless a moisture-tolerant primer goes down first
• Exterior floors in direct sun — epoxy chalks and fades under UV. If the floor sees sun, it needs a Dur-Aspart over it. We’d rather tell you that now than have you looking at a patchy floor in two summers.
• Over asphalt, or over any surface that flexes
• Slabs younger than 28 days

Coveragea

At a 2 mm build, o10-liter 10 kit covers approximately 7 m².

That figure assumes a flat, closed, primed slab. On a porous or open-textured floor, the first pour will find every low spot and every pinhole, and coverage can drop by 10% or more. Prime properly and the numbers hold.

The numbers